UWC-U.2

Purpose-built for datacenter U.2 drives — 20 wiped and certified in under five minutes.

Weight, thermal load, ingress rating, fabric topology and rail dimensions will land here once engineering signs off the published sheet.

A benchtop station rather than a floor install: set it down and connect power. Nothing about the room has to change.

Power on: the station PXE-boots your licensed wipe suite from your facility server in one to two minutes. No network at the site? Insert the standalone boot USB at the front-panel port and run fully air-gapped — certificates export the same way.

20 enterprise U.2 slots — seated by hand and detected as each drive goes in. No caddies, no adapters, no sorting.

From one console, confirm the count, select the standard — NIST SP 800-88 Rev. 2 Purge by cryptographic erase — enter the operator ID and job reference, and start. A full batch finishes in under five minutes, under 60 seconds per drive.

When the batch completes, export per-drive certificates (PDF) or the batch CSV from your wipe suite. Passing drives release to the wiped bin; any failure shows red and goes straight into the lockable quarantine bin, logged by serial and routed to destruction.

Optional modules and expansions that extend what the machine handles.

Consumables and field-replaceable parts to keep a unit in service.

Published PDFs for evaluation, procurement and installation.

Compare across the category.