Home / The Fleet / NFC-H100
FIRMWARE INTAKE

NFC-H100

H100 PCIe Firmware Intake Station

Six H100 cards firmware-flashed at once with mandatory VBIOS backup and verified images.

APEX-GENERATED RECORD AIR-GAP CAPABLE DISKLESS BY DESIGN
6× NVIDIA H100 PCIe 80 GB per run
Mandatory VBIOS backup pre-flash
SHA-256 verified from local NAS
Air-gapped — never pulls from internet
Full specifications Purchase orders only — nothing charges until you sign the quote.
NFC-H100 — H100 PCIe Firmware Intake Station
FIRMWARE INTAKE
1 photo
PHOTO 2
PHOTO 3
PHOTO 4
SPECIFICATIONS

Built to these numbers.

Published figures for the NFC-H100. Detailed engineering drawings, electrical schedules and site-prep requirements are issued with the quote.

EXPANDED SPEC TABLE

Weight, thermal load, ingress rating, fabric topology and rail dimensions will land here once engineering signs off the published sheet.

CAPACITY
6× NVIDIA H100 PCIe 80 GB per run
SAFETY
Mandatory VBIOS backup pre-flash
INTEGRITY
SHA-256 verified from local NAS
NETWORK
Air-gapped — never pulls from internet
CUSTODY MODEL
Group A — Apex-generated record
HOW IT WORKS

Back it up, flash it, verify it.

01
Intake and identify

Cards are read into the station by serial — the pre-flash state is captured first.

02
Mandatory VBIOS backup

No card is flashed until its existing VBIOS is backed up. This step cannot be skipped.

03
Verified image

The firmware image is pulled from the local NAS and SHA-256 verified. The station never pulls from the internet.

04
Flash and verify

Post-flash state is read back and compared against the intended image.

05
Intake record

Apex software writes a per-card intake record carrying pre and post firmware state.

THE RECORD

Apex generates the record.

On the NFC-H100, the certificate and custody log are produced by Apex software. That makes the record Apex’s product and Apex’s liability, held to the Apex Chain-of-Custody Specification.

WHAT THE RECORD CARRIES
—Per-card intake record (pre/post firmware)
—Primary identifier: GPU serial — read from the device, never operator-typed
—Custody events: intake, process start, process end, verification, disposition
—Method, tool and version, result (PASS · FAIL · QUARANTINED) and the accountable operator
WHAT THE RECORD CARRIES
—Every asset identified at intake by serial and recorded through to a documented disposition
—Method, tool and version, operator, result and timestamp on every record
—Written to your own NAS in a structured, exportable format
—Built to satisfy the documentation NIST SP 800-88 Rev. 2 expects
Every Apex-generated record is held to the same specification across the Group A machines. See the full custody model
STANDARDS

What this machine supports.

Recorded by Apex software on this machine, with the method and tool version written into every record.

Per-card intake record by GPU serial, fed to test-rig chain-of-custody
ADD-ONS, KITS & DOCUMENTS

Everything that ships around the machine.

These are being finalized for the NFC-H100. Ask us for current availability and we'll send what exists today.

Add-ons
COMING SOON

Optional modules and expansions that extend what the machine handles.

Capacity and bay expansions
Interface and adapter options
Integration and networking options
Ask about add-ons
Maintenance kits
COMING SOON

Consumables and field-replaceable parts to keep a unit in service.

Wear and consumable parts
Cable and connector replacements
Recommended spares package
Ask about kits
Documents
COMING SOON

Published PDFs for evaluation, procurement and installation.

Specification sheet (PDF)
Site prep & power requirements
Operator manual
Request documents

Spec a NFC-H100 for your floor.

Tell us your volume and asset mix and we'll confirm power, footprint and lead time. Fleet bundles are available across all 19 systems.

Purchase orders only — nothing is charged until you sign the quote. Talk to us first